Synchronize Date and Time (UTC)

You can use NTP servers to synchronize your date and time accurately. The NTP servers are located globally, and you may also have your own internal NTP server when your infrastructure has limitations on external access.

Time Server URL

Enter a valid IP address or fully qualified domain name (FQDN) for the NTP server. If the server is a globally located server on the Internet, we recommend using an FQDN.

Update at [hh:mm]

Select the scheduled time at which you would like the ADC to synchronize with the NTP server.

Update Period [hours]:

Select how often you would like synchronization to occur.

NTP Type:

 Public SNTP V4 – This is the current and preferred method when synchronizing with an NTP server. RFC 5905

 NTP v1 Over TCP – Legacy NTP version over TCP. RFC 1059

 NTP v1 Over UDP – Legacy NTP version over UDP. RFC 1059

Note: Please note that synchronization is in UTC only. If you wish to set a local time, this can only be done manually. This limitation will be changed in later versions to enable the ability to select a time zone.