REST API

The REST API, also known as RESTful API, is an application programming interface that conforms to the REST architectural style and allows configuration of the ADC or data extraction from the ADC. The term REST stood for representational state transfer and was created by computer scientist Roy Fielding.

Option	Description
Enable REST	Tick this box to enable access using the REST API. Note that you will also have to configure which adapter on which REST is enabled. See the note on the Cog link below.
SSL Certificate	Choose a certificate for the REST service. The drop-down will show all the certificates installed on the ADC.
Port	Set the Port for the REST service. It is a good idea to use a port other than 443.
IP Address	This will display the IP address that the REST service is tied to. You can click the Cog link to access the Network page to change which adapter the REST service is enabled on.
Cog Link	Clicking on this link will take you to the Network page where you can configure an adapter for the REST.

Documentation for REST API

Documentation on how to use the REST API is available: jetAPI | 4.2.3 | jetNEXUS | SwaggerHub

Note: If you get errors on the Swagger page this is because they have an issue supporting query strings

Scroll past the errors to jetNEXUS REST API

Examples

GUID using CURL:

 Command

curl -k HTTPs://<rest ip>/POST/32 -H "Content-Type: application/json" -X POST -d '{"<rest username>":"<password>"}'

 will return

{"Loginstatus":"OK","Username":"<rest username>","GUID":"<guid>"}

 Validity

o GUID is valid for 24 hours

Licence Details

 Command

curl -k HTTPs://<rest ip>/GET/39 -GET -b 'GUID=<guid;>